alguien tiene el cable para tv del ZV:M?

[titosexy]

Pues eso, alguien lo ha podido comprar en alguna tienda?

[jokerman]

http://search.ebay.es/creative-zen-m_W0QQcatrefZC6QQflocZ1QQfromZR10QQfsooZ1QQfsopZ3QQftrtZ1QQftrvZ1QQsacatZQ2d1QQsaprchiZQQsaprcloZQQsaslcZ3QQsbrsrtZl
http://cgi.ebay.es/Creative-Zen-Vision-Vision-M-RCA-Audio-Video-AV-cable_W0QQitemZ9720312890QQcategoryZ86541QQrdZ1QQcmdZViewItem
http://cgi.ebay.es/Creative-Zen-Vision-M-AV-Cable-Connect-to-TV_W0QQitemZ9720509044QQcategoryZ86540QQrdZ1QQcmdZViewItem

en la tienda online de creative también lo tienen.
    Por cierto, estoy pensando en comprarme algún día ese reproductor, que tal te va con él? Las cosas que no me gustan es su grosor y la duración de baterías que se me hace algo escasa.

Un saludo

Pdta: mas cosas que he encontrado, que tal el inglés?:

Alternative methods for TV-Out

There are a few other cables that have been confirmed to work with the Vision:M. These include the a/v cable from Cowon and ones from Archos. If you have a Canon digital camera (SD300, 400, 450, etc..), the cable that comes with that will also work, though not perfect.

Here is an alternative if you're into doing a mod yourself using a standard camcorder A/V cable

1.) Cut all the connectors, Yellow, Red and White
2.) Skin all the inside covered connectors
3.) The Y plug inner wire wrapped with yellow rubber goes to the Red ground, the red ground goes to the red inner wire. This is now a complete video connection.
4.) You don't need the ground wiring attached 3.5 mm jack for the white or yellow connector so u can cut it. Your audio ground goes to the same as the video ground. The remaining two inner cables are left and right channels. so match them up with the left and right channels with the plugs.

Thanks, naveed

Here is another alternative using an Ipod video cable:

1.) Buy a cheap Ipod compatible A/V cable.
2.)Cut off the video line a few inches from the end and reverse the wires. (Be sure to insulate the connections with tape or heat shrink tubing.)
3.) Cut about a 1" strip of the outer plasic insulation away from each of the L/R cables near the ends, to reveal the stranded copper "shield" wire. Do not damage (or strip) the inner conductor!
4.) Cut and remove the bare copper shielding from L/R cables (i.e., Break only the outer wire, leave the inner wire intact).

Thanks, DimitroffVodka

[carludo666]

yome lo he comprado en la tienda on.line de creative, primero me compre un un generico en la fnac pero no iba, para q funcionara habia que dejarlo sacado un poco y perdia uno de los canales de audio así que  me compre el oficial  va de maravilla!
x cierto en bixo este es una pasada, calidad de sonido muy bueno, algo bajo el volumen pero bueno, y el video es inmeorble, una buena compra vamos!

[titosexy]

El cable lo has comprado en la tienda online europea o americana? te lo han enviado a España? Cuanto te tardo?

[jokerman]

algo bajo el volumen pero bueno

     Lo de que se oiga algo bajo es debido a la limitación de volumen de los modelos europeos aquí tienes como quitarla:


How to remove European Volume Cap

1| Download the latest American firmware update (currently v1.30.02 download here)

2| Detach the Zen Vision:M player from your computer, and ensure that the unit is off.
3| Slide the Power switch towards the Power icon and hold the switch in the Power On position.
4| Push the end of a pin-like object (for example, a straightened paper clip) into the reset hole, press gently and remove.
5| Release the Power switch when the Creative logo appears. The Recovery Mode appears and has these options:
* Clean Up (Performs a disk scan on the player's hard disk, it will not affect music files)
* Format All (Formats the players hard disk - Note: all contents will be lost)
* Reload Firmware (Reloads the Operating System on the Zen. Select this option ONLY if there is a firmware available to reload.)
* Reboot (Reboots the device).
6| Select reload firmware
7| Once done connect the player to your pc and run the American firmware upgrade
8| Leave it to do this and reboot, then rebuild, and voila all done

[titosexy]

nadie tiene el cable comprado en alguna tienda??

[carludo666]

el cable tarda una semana mas o menos y no hay ningon problemaa de envio, funciona muy bien la pagina oficial

[Espartak]

algo bajo el volumen pero bueno

     Lo de que se oiga algo bajo es debido a la limitación de volumen de los modelos europeos aquí tienes como quitarla:


How to remove European Volume Cap

1| Download the latest American firmware update (currently v1.30.02 download here)

2| Detach the Zen Vision:M player from your computer, and ensure that the unit is off.
3| Slide the Power switch towards the Power icon and hold the switch in the Power On position.
4| Push the end of a pin-like object (for example, a straightened paper clip) into the reset hole, press gently and remove.
5| Release the Power switch when the Creative logo appears. The Recovery Mode appears and has these options:
* Clean Up (Performs a disk scan on the player's hard disk, it will not affect music files)
* Format All (Formats the players hard disk - Note: all contents will be lost)
* Reload Firmware (Reloads the Operating System on the Zen. Select this option ONLY if there is a firmware available to reload.)
* Reboot (Reboots the device).
6| Select reload firmware
7| Once done connect the player to your pc and run the American firmware upgrade
8| Leave it to do this and reboot, then rebuild, and voila all done

Preguntas a ello?
1- puedes pasar el link de sta pagina?
2- si le pones el firmware americano afecta al idioma del reproductor?
3- vale la pena, la diferencia de volumen?
4- hay otra opcion de hacer lo mismo que no sea acutalizando firmware, por ejemplo en sony se tenia que apretar una serie de botones para entrar en un submenú y ahi cambiarlo.

[Espartak]

algo bajo el volumen pero bueno

     Lo de que se oiga algo bajo es debido a la limitación de volumen de los modelos europeos aquí tienes como quitarla:


How to remove European Volume Cap

1| Download the latest American firmware update (currently v1.30.02 download here)

2| Detach the Zen Vision:M player from your computer, and ensure that the unit is off.
3| Slide the Power switch towards the Power icon and hold the switch in the Power On position.
4| Push the end of a pin-like object (for example, a straightened paper clip) into the reset hole, press gently and remove.
5| Release the Power switch when the Creative logo appears. The Recovery Mode appears and has these options:
* Clean Up (Performs a disk scan on the player's hard disk, it will not affect music files)
* Format All (Formats the players hard disk - Note: all contents will be lost)
* Reload Firmware (Reloads the Operating System on the Zen. Select this option ONLY if there is a firmware available to reload.)
* Reboot (Reboots the device).
6| Select reload firmware
7| Once done connect the player to your pc and run the American firmware upgrade
8| Leave it to do this and reboot, then rebuild, and voila all done

Preguntas a ello?
1- puedes pasar el link de sta pagina?
2- si le pones el firmware americano afecta al idioma del reproductor?
3- vale la pena, la diferencia de volumen?
4- hay otra opcion de hacer lo mismo que no sea acutalizando firmware, por ejemplo en sony se tenia que apretar una serie de botones para entrar en un submenú y ahi cambiarlo.